Copycam Operation; Powering On The System; Making Copies Of The Board; What You Can Copy - PolyVision CopyCam Installation And Operation Manual

C C O
OPY AM PERATION
P O
OWERING
CopyCam powers on when you connect the power adapter to a wall outlet.
The system initializes (reboots) in two minutes or less. CopyCam is ready to
use when the power LED on the control pad turns green and the voice
message says "Hello."
M C
AKING OPIES OF THE
CopyCam E makes copies of your whiteboard or chalkboard and saves
them on the CopyCam web server on your local area network (LAN).
CopyCam Pro gives you a choice of three ways to make copies of your
whiteboard or chalkboard:
on the printer
•
on a floppy diskette
•
on the web
•
You can use any combination to save copies during a presentation. Refer
to "CopyCam Pro: Copying in any Combination" on page 56.

What You Can Copy

CopyCam can copy writing and drawings in any color on whiteboards or
chalkboards. You can use any chalk color or any marker color. You can
even copy overhead projections if they use line art. CopyCam captures an
area of up to 4' x 8' (1200mm x 2400mm) on a wall, whether or not there is
a board there.

What You Can't Copy

CopyCam will not produce a clean image from large blocks of solid color,
photos, or 3D objects.
52
S
N THE YSTEM
B
OARD

CopyCam Operation