Calibrating Copycam; When To Calibrate Copycam; How To Calibrate Copycam; Materials - PolyVision CopyCam Installation And Operation Manual

C C
ALIBRATING OPY
W C
HEN TO
Calibration is necessary in many CopyCam whiteboard installations.
Blackboards (or any board that is not white) always require calibration.
Conditions that are likely to require calibration include:
boards without easily discernible borders
•
CopyCam mounted above an area with no borders
•
CopyCam mounted to a board that is greater than 8' (2400mm) long
•
or 4' (1200mm) high
You need to calibrate when:
you have a blackboard (or any board that is not white)
•
images are distorted
•
the voice message (from the control pad) reports "calibration needed"
•
H C
OW TO ALIBRATE
Calibrating CopyCam involves showing it the corners of your board (or 4' x
8' [1200mm x 2400mm] limit) using five of the six calibration sheets
provided.

Materials

Locate and have ready to use:
tape measure
•
adhesive tape (provided)
•
six calibration sheets (provided)
•
NOTE: note:
If you cannot locate your calibration sheets, you can download them from
the PolyVision web site at: http://www.polyvision.com. You will need a color
printer to print these sheets.
28
C
AM
C C
ALIBRATE OPY AM
C C
OPY AM

Calibrating CopyCam