Copycam Pro: Copying To The Printer; Copycam Pro: Copying To A Floppy Diskette - PolyVision CopyCam Installation And Operation Manual

C C P
OPY AM
CopyCam Pro comes with its own color printer. The color printer receives
its data using Bluetooth wireless technology. (You can also configure
CopyCam to use some ethernet network printers. Refer to "CopyCam Pro:
Changing Printers" on page 46.)
CopyCam Pro emits radio signals to the printer's antenna, so no physical
connection is required between them. The printer should be within 30 feet
(10m) of the CopyCam camera arm, but it does not need to be in the same
room. If a wall is between CopyCam Pro and the printer, the antenna range
may be slightly reduced.
To print a copy of the board:
1 Be sure the printer is turned on, and has paper and ink.
2 When you are ready to capture, press the
pad once for each copy you want to print.
3 Continue your presentation after you hear the voice message say
"captured" and the LED changes from blinking yellow to solid yellow.
C C P
OPY AM
You can save a copy of the board to a floppy diskette as an image file
(.png). One floppy diskette holds 10 to 15 copies, depending on the
complexity of the images. Files are named CCam0001.png,
CCam0002.png, etc. Each copy that you save receives the next sequential
number. After 1000 copies have been saved, the number wraps back to
0001. The date and time of capture are part of the file details.
CopyCam Operation
: C
RO OPYING TO THE
: C F
RO OPYING TO A
P
RINTER
button on the control
D
LOPPY ISKETTE
53