PolyVision CopyCam Installation And Operation Manual page 47

Bluetooth Printer Channel (CopyCam Pro only)
This field displays the Bluetooth device address of the wireless printer for
this CopyCam. If you need to change printers, refer to "CopyCam Pro:
Changing Printers" on page 46.
Ethernet Printer Address (CopyCam Pro only)
To print to a networked printer instead of the wireless printer that comes
with CopyCam, enter the networked printer IP address in this field. If you
need to change printers, refer to "CopyCam Pro: Changing Printers" on
page 46.
Control Pad Volume
Choose the control pad voice message volume from five volume levels: off,
soft, medium soft, medium loud, or loud.
Date/Time
Set the correct date and time. This information is associated with saved
copies to help you identify when each copy was saved.
Low Light Warning
Remove the check to disable the control pad voice message that warns of
low light conditions.
Firmware Update Server
Registered users receive information about free firmware updates. To
update CopyCam firmware on a computer with Internet access:
1 Enter the IP address of the PolyVision firmware server, or leave
"default" in this field. (This IP address might have changed since you
purchased your CopyCam. If the update fails, go to "Support" at
www.polyvision.com to find the appropriate IP address and enter it in
this field.)
2 Click the "Start Update" button.
Web Configuration and Testing 43