Attach Schedules To Events Menu - GE 60-960-95 Installation Instructions Manual

Set Up Schedules (05XXY, where
XX=schedule 00 thru 15 and
Y=start [0]/stop[1] 0 thru 8-Mon-
day thru Sunday [2-8])
This menu lets you set up start/stop times for
each day of the week.
Note
If you are programming schedules for your cus-
tomer, be sure to record the settings in the
User's Manual
Latchkey Reports (060nn-Open-
ing, 061nn-Closing, where
nn=Schedule number [0 to 15])
This setting lets you attach the Latchkey
Opening report feature and the Latchkey
Closing report feature to time schedules.
Concord Ultra
¾
To set up a Time Schedule:
1. Press A or B until the display shows
2. Press # and the display shows
ule number, press A or B until the desired schedule number appears.
3. Press # and the display shows
4. Enter the desired starting time (00:00–23:59). The display flashes the
entered time. Press # and the display shows
5. Press B and the display shows
6. Enter the desired stop time (00:00–23:59). The display flashes the entered
time. Press # and the display shows
7. Press B and the display shows
a different day, continue pressing B until the desired day appears.
8. Press 1 (off) or 2 (on). The display flashes the entered selection.
9. Press # and the display shows the new setting for the selected day.
10. Repeat steps 7 and 8 until all desired settings for each day are set.

Attach Schedules to Events Menu

The
ATTACH SCHEDULES TO EVENTS
schedules:
• Latchkey Opening—sends a report if system is disarmed within the attached time schedule.
• Latchkey Closing—sends a report if system is armed within the attached time schedule.
• Exception Opening—sends a report if system is not disarmed within the attached time
schedule.
• Exception Closing—sends a report if system is not armed within the attached time sched-
ule.
• Lights (1–9) activate X10 controlled lights by the attached time schedule.
• Outputs (1–6) allow users to attach onboard (1–2) and SnapCard outputs to a schedule.
• Arming—Allows the user to arm the panel at the schedule start time.
Closing report feature to time schedules.
¾
To Attach a Schedule to Latchkey Opening or Latchkey Closing:
1. Press A or B until the display shows
2. Press # then A or B until the display shows
KEY CLOSING
3. Press # and the display shows
you want a different schedule, press A or B until the desired schedule
appears.
4. Press 1 (off) or 2 (on). The display flashes the entered selection.
5. Press # and the display shows the new setting for the selected schedule.
SET UP SCHEDULES
SCHEDULE 00
START TIME hh:mm
STOP TIME hh:mm
STOP TIME hh:mm
MONDAY OFF/ON
menu lets you link the following system events to time
Attach Schedules To Events (Default = off)
ATTACH SCHEDULES TO EVENTS
.
SCHEDULE 00 OFF/ON
(Default = 00:00)
.
. If you want a different sched-
(current setting).
(new setting).
START TIME hh:mm
(current setting).
(new setting).
(current setting). To select
.
LATCHKEY OPENING OR LATCH-
(current setting). If
60