Using The Sewing Type Selection Key - Brother NV1500 Operation Manual

SELECTING A UTILITY STITCH
Memo
• The next time that the same straight stitch is
selected, the stitch length is set to 2.0 mm.
• All stitch settings (stitch width (zigzag width), stitch
length, thread tension, automatic thread cutting, and
automatic reverse/reinforcement stitching) are
saved, not just the setting that was changed. When
the same stitch pattern is selected, the last settings
saved are displayed even if the machine was turned
off. If the settings are changed again and
pressed, or if
to its default, the new settings are not saved unless
is pressed another time.

Using the Sewing Type Selection Key

By pressing , a utility stitch can also be selected
according to its desired use. When you are not sure
which stitch to select for your application or when you
need information on how certain stitches are used,
press , select the appropriate stitch for your
project, and then follow the instructions to sew the
selected stitch.
We recommend that beginners use this method to
select stitches.
Example: Displaying information about
overcasting
a
Press
→ The advice screen is displayed.
50
is pressed to reset the setting
.
b
Press
is
→ The upper part of the screen displays a selection of
overcasting stitches with explanations.
c
Read the descriptions, and then select the
appropriate stitch.
* Press
→ The screen displays directions for sewing the
selected stitch.
d
Follow the directions to sew the stitch.
* Press
e
When you have finished sewing, press
.
or to scroll the page.
to display the next page.
.