Lcd Screen; Utility Stitch Screen - Brother 882-D30 Operation Manual

LCD SCREEN

LCD SCREEN

• Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screwdriver,
or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a
sharp object may damage the screen.

■ Utility Stitch Screen

Press a key with your finger to select the stitch pattern, to select a machine function, or to select an
operation indicated on the key. When the key display is light gray, the function is not currently available.
No. Display
a Needle position
setting display
b Selected stitch
display
c Presser foot display
d Stitch preview
e
Pattern display size
f Stitch selection
screen
g
Page display
B-20
CAUTION
a
b
c
d
e
Key Name
Shows single or twin needle mode setting, and the needle stop
position.
Single needle/down
position
Twin needle/down
position
Shows the name and code number of the selected stitch.
Shows the presser foot code. Attach the presser foot indicated in this
display before sewing.
Shows a preview of the selected stitch. When shown at 100%, the
stitch appears in the screen at nearly its actual size.
Shows the approximate size of the pattern selected.
: Nearly the same size as the sewn pattern
: 1/2 the size of the sewn pattern
: 1/4 the size of the sewn pattern
* The actual size of the sewn pattern may differ depending on the type
of fabric and thread that is used.
Press the key for the pattern you want to sew. Use
Shows additional pages that can be displayed.
g
h
f
Explanation
Single needle/up position
Twin needle/up position
to change to different stitch groups.
Page
–
S-3
B-47
S-21
S-21
S-21
–