Brother MFC-9130CW Service Manual page 68

Error message
Upper line
Toner Error One or more Toner
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
Toner Low Prepare New Toner
Cartridge.
Touchscreen Remove any
initialization material which is
failed on the touchscreen.
Unusable Remove the
Device Device. Turn the
power off and back
on again.
Lower line
The develop release sensor
detected the develop roller
disengagement or engagement
failure.
Dot counter of the toner cartridge
or develop roller counter reaches
the upper limit soon.
An error occurred during touch
panel initialization.
Overcurrent was caused because a
USB device that did not meet the
specifications was inserted into the
USB port.
2-29
Description
Error Refer
codes to:
6E00 2-57
4B01 2-45
4B02
4B03
4B04
D800 2-79
EC00 2-81
Confidential