Brother MFC-9130CW Service Manual page 255

(8) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the LED FG harness from
the Modem PCB ASSY.
Remove the two Taptite bind B M4x12 screws to remove the Modem PCB ASSY from the
Joint cover ASSY.
(9) Disconnect the wiring of the LED FG harness.
Taptite bind B M4x12
Harness routing: Refer to
Joint cover ASSY
Fig. 3-119
" Modem PCB ASSY"
3-92
Screw pan (S/P washer) M3.5x6
LED FG harness
Modem PCB ASSY
Confidential