Software Version Check (Function Code 25) - Brother MFC-9130CW Service Manual

Color fax/mfc
Hide thumbs Also See for MFC-9130CW:
Table of Contents

Advertisement

1.4.9

Software version check (Function code 25)

<Function>
This function allows you to check the version information of the firmware or programs, or
check sum information.
<Operating procedure>
(1) Press the 2 and 5 keys in this order in the initial state of the maintenance mode.
"TOTAL:Ver A" is displayed on the LCD.
(2) When you press the Mono Start key, the display on the LCD changes as shown in the list
below.
(3) Press the Stop key to return the machine to the initial state of the maintenance mode.
TOTAL:Ver A
SUB1:Ver1.00 (P)
ENG:Ver1.00
NET:Ver1.00
PNL:U0810231900
PNLB:01108011500
i0801170900:0000
B1112312359:1234
U1112312359:1234
D1112312359:1234
P1112312359:1234
ROM Check Sum
*1
How to display the check sum information
Press the SET key when its version information is displayed on the LCD to display the
check sum information. Press the SET key again to returns to the version information
display. Press the Mono Start key to check the next item.
*2
(P) indicates that the firmware supports PCL/PS.
*3
There are two types of check sum information which can be checked with this function.
This function checks if these two types of check sum information are matched each
other. When you press the SET key while "ROM Check Sum" is displayed, check is
automatically conducted for each ROM of each software part. When the check sum is
matched, "OK" is displayed on the LCD. When all ROMs result in OK, "ROM Check
Sum OK" is displayed at the end, and the operation is finished. When the check sum
of any ROM is not matched, "NG" is displayed, and the display stops.
LCD
*1
Main firmware version information
*1
Sub firmware (PCL/PS) version information
(P): Identifier of PCL/PS
Engine program version information
Network program version information
Panel firmware version information
Panel boot firmware version information
I-FAX version information
*1
Boot program creation date
*1
Main firmware creation date
*1
Demo firmware creation date
*1
Sub firmware (PCL/PS) creation date
Check sum self-diagnosis function
Description
*2
5-19
*3
Confidential

Advertisement

Table of Contents
loading

Table of Contents