Brother MFC-9130CW Service Manual page 70

Code 1 Code 2
20 01 Flag field not detected.
20 02 Carrier was OFF for 200 ms or longer.
20 03 Abort detected ("1" in succession for 7 bits or more).
20 04 Overrun detected.
20 05 A frame for 3 seconds or more received.
20 06 CRC error in answerback.
20 07 Echo command received.
20 08 Invalid command received.
20 09 Command ignored once for document setting or for
dumping-out at turn-around transmission.
20 0A T5 time-out error
20 0B CRP received.
20 0C EOR and NULL received.
20 0D Though the FIF command transmission bit is ON, the
corresponding command has not been received.
20 0E EOR command received.
20 13 After the last page was received, connection was
broken without receiving DCN. (After EOP reception
and CFR transmission, BYE notification was received
before DCN reception.) (T38)
32 01 Remote terminal only with V.29 capability in 2,400 or
4,800 bps transmission.
32 02 Remote terminal not ready for polling.
32 10 Remote terminal not equipped with password function
or its password switch OFF.
32 11 Remote terminal not equipped with or not ready for
confidential mailbox function.
32 12 Remote terminal not equipped with or not ready for
relay broadcasting function.
32 13 No confidential mail in the remote terminal.
32 14 The available memory space of the remote terminal is
less than that required for reception of the confidential
mail or relay broad-casting instruction.
32 15 Machine at the other end does not have cipher
receiving function.
32 16 Machine at the other end does not have SEP function.
32 17 Machine at the other end does not have SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal paper width requested.
Cause
2-31
Refer to:
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
Confidential