Brother MFC-9130CW Service Manual page 293

(4) Remove the two Taptite cup S M3x8 SR screws. Release the Hook to remove the Main
shield plate from the Side frame L ASSY.
Side frame L ASSY
Taptite cup S M3x8 SR
<Left side>
(5) Disconnect the wiring of the USB host PCB harness, Registration clutch harness, Paper
feed clutch harness, Registration front/rear/manual feed sensor harness, Paper feed
harness and Eject sensor PCB harness.
(6) Release the three Hooks to remove the Line holder upper from the Process drive unit.
Process drive unit
Hook
Line holder upper
Hook
<Left side>
Hook
Main shield plate
Fig. 3-182
Fig. 3-183
Hook
3-130
Confidential