Brother MFC-9130CW Service Manual page 278

(6) Remove the Flat core from the two LED flat cables (C and K) of the LED flat cable holder.
Flat core
LED flat cable (K)
Flat core
LED flat cable (C)
(7) Pull out the LED flat cable (C) from the Flat core.
(8) Pull out the LED flat cable (K) from the LED flat cable holder by removing the
Double-sided adhesive tape.
Double-sided adhesive tape
LED flat cable (K)
Location where double-sided
adhesive tape is attached
Fig. 3-160
8
7
Fig. 3-161
3-115
LED flat cable (K)
LED flat cable (C)
LED flat cable holder
LED flat cable (C)
Flat core
LED flat cable holder
Confidential