Brother MFC-9130CW Service Manual page 20

HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely
hot. Wait at least 10 minutes for the product to cool down before you touch the internal
parts of the product.
(DCP and MFC)
This product is heavy and weighs more than 20.0 kg (44.1 lb). To prevent possible injuries,
at least two people should lift the product. One person should hold the front of the product,
and one person should hold the back, as shown in the illustration below. Be careful not to
trap your fingers when you put the product down.
Some areas of the product can cause injury if covers (shaded) are closed with force.
Take care when placing your hand in the areas shown in the illustrations, and DO NOT
close the covers with force.
viii
Confidential