4.2.4
Wrinkles on paper
<User Check>
- Check if the paper is loaded into the each paper tray correctly.
- Turn back the paper loaded in the paper tray or change the orientation of the paper by 180
- Adjust the paper guide corresponding to the paper size.
- Check if the thickness of the paper is 60 to 105 g/m
(60 to 163 g/m
- Check if paper is not damp.
- Check that no dust adheres to the fuser unit.
- Check whether the paper type is appropriate.
Step
1
4.2.5
Paper inclines diagonally
<User Check>
- Check if the paper is loaded into the each paper tray correctly.
- Adjust the paper guide corresponding to the paper size.
- Check if the thickness of the paper is 60 to 105 g/m
(60 to 163 g/m
- Check if too much paper is loaded in the tray.
Step
1
2
3
2
for manual feed slot.)
Cause
Fuser unit failure
2
for manual feed slot.)
Cause
Registration clutch failure
Paper feed unit failure
Main PCB failure
2
.
Replace the fuser unit.
2
.
Replace the registration clutch.
Replace the paper feed unit.
Replace the main PCB ASSY.
2-84
Remedy
Remedy
Confidential
°
.