Pc Print Function Setting (Function Code 43) - Brother MFC-9130CW Service Manual

1.4.13 PC print function setting (Function code 43)

<Function>
This function is used to change the settings of the various print functions summarized in the
table below.
<Operating procedure>
(1) Press the 4 and 3 keys in this order in the initial state of the maintenance mode.
"Manual Feed" is displayed on the LCD.
(2) Press the
(3) For fixed parameters (On/Off, etc.), press the
using the numeric keys. And press the SET key.
For parameters requiring numerical value entry, directly input a numeric value from the
ten-key pad and press the SET key.
(4) Press the Stop key to return the machine to the initial state of the maintenance mode.
■ Function setting
LCD
Manual Feed
Resolution
Toner Save
Density
JB-Can Time
Sleep Time
Page Protection
Emulation
Auto I/F Time
Media Type
Paper Size
Copies
Orientation
P-Pos X-Offset
or key to select the function you want to set and press the SET key.
Detail description
Switching of the Manual Feed
Resolution to print
Switching of the Toner Save
Switching of the Density level
Setting of the time until the
host time-out at the Job
Cancel
Setting of the time until enter
the Sleep Mode
Switching of the protection of
the page memory
Switching of the emulation
Switching of the I/F open time
Switching of the paper type
Switching of the area of
develop the image
Switching of the print copies
Switching of the print direction
Switching of the offset print
position of the landscape
orientation
5-25
or key, or change the parameter
Set value
On/Off
300/600/1,200 dpi
On/Off
-6 to 6
0 to 225 (seconds)
0 to 99 (minutes)
Off/Letter/A4/Legal/Auto
Auto/HP/PS
1 to 99 (seconds)
Thin/Plain/Thick/Thicker/
Trancparency/Recycled/
Bond/Envlopes/EnvThin/
EnvThick
Letter/Legal/A4/Executive/
ISOB5/JISB5/A5/ISOB6/
A6/Monarch/C5/COM10/
DL/DLL/A4Long/Hagaki/
Folio
1 to 99 (pages)
PortLait/Landscape
-500 to 500 (1/300 dpi)
Initial
value
Off
600
Off
0
4
5
Off
Auto
5
Plain
or
Thin
Letter
or
A4
1
Portlait
0
Confidential