Brother MFC-9130CW Service Manual page 60

Error
Problem
codes
9804 Error occurred with the value
measured during density sensor
sensitivity calibration.
9901 Error occurred with the value
measured during adjustment of
color registration.
9902 Dot counter or develop roller
counter of color toner has
reached the upper limit during
adjustment of color registration.
9903 Error occurred during patch data
printing in adjustment of color
registration.
9A01 Error occurred with the value
measured during auto color
registration performed from the
control panel.
9A02 Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration
performed from the control
panel.
9A03 Error occurred during patch data
printing in auto color registration
performed from the control panel.
9A04 ---
9C01 ---
9C02 ---
9C03 ---
9C06 ---
9C07 ---
A000 Upon scanning the second side
in duplex scanning, scanned
data cannot be output with the
required number of pixels and
image processing is not
completed successfully.
Refer Error
to: codes
2-67 A200 During document scanning, the
first side document scanning
position sensor detected that the
document length was 90 cm or
more.
2-68
A300 Though a document was fed and
conveyed by the specified
distance or longer, the first side
document scanning position
2-68
sensor did not detect the passing
of the paper.
A400 The ADF cover sensor detected
that the ADF cover was opened.
2-69
A500 Upon scanning a fax, the first
side CIS white or black
2-70 calibration data was not within
the normal range.
A600 Though a fax was scanned again
after A500 error, the first side
2-70 CIS white or black calibration
data was not within the normal
range.
A700 The ROM color parameter does
not match the first side CIS or
2-71 second side CIS.
A800 When an image was scanned
and processed, an error was
detected in ROM color parameter.
A900 When an image was scanned
and processed, a scanning error
occurred.
AA00 ---
AB00 ---
2-71 AC00 Upon scanning a fax, the second
side white or black calibration
data was not within the normal
range.
2-21
Problem
Confidential
Refer
to:
2-72
2-72
2-72
2-73
2-73
2-73
2-73
2-73
2-73