Brother MFC-9130CW Service Manual page 315

(5) Remove the Taptite bind B M4x12 screw to release the ten Hooks. Remove the
High-voltage power supply PCB ASSY from the Main body.
Harness of Develop
release sensor PCB ASSY
Hook
Assembling Note:
- Be careful that the Harness of the Main fan and Harness of the Develop release sensor
PCB ASSY are connected.
- Be careful not to damage the Wire cap.
Hook
High-voltage power supply PCB ASSY
Fig. 3-221
3-152
Taptite bind B M4x12
Hook
Hook
Main body
Harness of Main fan
Hook
<Right side>
Confidential