Brother MFC-9130CW Service Manual page 253

Assembling Note:
When attaching the Joint cover open button, make sure that the Spring is placed as shown
in the figure.
Joint cover
open button
Spring
Joint cover ASSY
Joint cover ASSY
(3) Remove the five Taptite bind B M4x12 screws from the Joint cover ASSY.
(4) Remove the Taptite cup S M3x8 SR screw to remove the LED FG harness from the Sub
frame ASSY.
Taptite bind B M4x12
Joint cover ASSY
Taptite bind B
M4x12
Sub frame ASSY
Spring
Fig. 3-115
Taptite bind B M4x12
Fig. 3-116
3-90
Joint cover open button
Taptite cup S M3x8 SR
LED FG harness
Taptite bind B
M4x12
Taptite bind B
M4x12
Confidential