Brother MFC-9130CW Service Manual page 322

(5) Release the three Hooks to remove the Wire cover from the Side cover R.
Hook
Hook
(6) Disconnect the wiring of the Heater harness and Inlet harness ASSY.
(7) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the LVPS FG harness.
(8) Remove the six Taptite pan (washer) B M4x12 DA screws and two Taptite cup S M3x8 SR
screws to remove the LVPS plate lower from the Main body.
Taptite pan (washer) B M4x12 DA
LVPS plate lower
Main body
Wire cover
Wire cover
Hook
Hook
Hook
Hook
Hook
Hook
Side cover R
Side cover L
Fig. 3-232
Taptite pan (washer)
B M4x12 DA
Fig. 3-233
3-159
Hook
Taptite cup S M3x8 SR
Taptite pan (washer) B M4x12 DA
Screw pan (S/P washer) M3.5x6
LVPS FG harness
Wire cover
Wire cover
Confidential