Deletion Of User Setting Information, Etc - Brother MFC-9130CW Service Manual

2.3

Deletion of User Setting Information, etc.

In this machine, the user setting information is stored in the EEPROM and flash memory of the
main PCB. You can delete all the data listed below at a time with the procedure given below.
- Information related to Net
- User setting information
<Operating procedure>
(1) Press "Menu" on the LCD in the ready state.
(2) Press "All Settings" on the LCD.
(3) Press "Initial Setup" on the LCD.
(4) Press "Reset" on the LCD.
(5) Press "All Settings" on the LCD.
(6) Once "Reset All Settings? Yes No" appears on the LCD, press the Yes key.
(7) "Reboot OK? Press [Yes] for 2 sedonds to confirm." will appear on the LCD. Press "Yes"
for 2 seconds or longer, the user settings are cleared, and the machine returns to the
ready state.
Note:
The machine returns to the ready state automatically if no panel operation is implemented
for 30 seconds.
5-71
Confidential