Drive Status Indicators; Back Of Enclosure - Promise Technology VTrak E610f Product Manual

VTrak E-Class Product Manual
* Field Replacement Unit: includes fan, battery, and power supply unit (PSU).
** Blinks once every two seconds.
See page 249 for more information about field-replaceable components.
See page 336 for a discussion of critical and offline logical drives.

Drive Status Indicators

There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
Figure 3. VTrak drive carrier LEDs
LEDs
Power/
Activity
Status
See "Critical & Offline Disk Arrays" on page 336 for a discussion of rebuilding and
failed disk drives.

Back of Enclosure

When the FRU Status LED on VTrak's front panel shows Amber or Red, check
the LEDs on the back of VTrak. These LEDs give the status of the field
replaceable units.
Steady
Dark
Green
Drive
No Drive
Present
No Power/
Drive OK
No Drive
State
Flashing
Green
Activity
—
310
Disk Status
Power/Activity
Amber Red
—
Drive Drive
Rebuilding Error
—