Making Netsend Settings - Promise Technology VTrak E610f Product Manual

• To use a HTTP connection, beside CIM HTTP Enabled choose the Yes
option and enter a port number in the field provided (5988 is the default)
• To use a HTTPS connection, beside CIM HTTPS Enabled choose the
Yes option and enter a port number in the field provided (5989 is the
default)
• To use CIM authentication, beside CIM authentication choose the Yes
option
• To change your password, beside Change Password, choose the Yes
option.
Enter the old password and a new password into the fields provided.
The default password is password.
There is only one user. The default name is cim. No changes are possible.
5. Click the Submit button.
6. Click OK in the confirmation box.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping CIM service
To stop the CIM service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting CIM service
To start or restart the CIM service, click the Start or Restart button.

Making Netsend Settings

This service is normally Stopped and set to Manual start. See "Managing
Netsend Recipients" on page 106.
To change the Netsend settings:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Netsend link on the Service tab.
4. Click the Start button to start the Netsend service.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
105