Managing Snmp Trap Sinks - Promise Technology VTrak E610f Product Manual

4. Enter information or change settings as required.
• Enter the SNMP Port number. 161 is the default.
• Enter a System Name. There is no default name.
• Enter a System Location. USA is the default.
• Enter a System Contact. The email address of the administrator or other
individual.
• Enter the Read Community. Public is the default.
The Write Community is set to Private, no options.
To add a Trap Sink, see "Adding Trap Sinks" below.
5. Click the Submit button.
6. Click OK in the confirmation box to restart the SNMP service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping SNMP service
To stop the SNMP service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting SNMP service
To start or restart the SNMP service, click the Start or Restart button.

Managing SNMP Trap Sinks

Adding Trap Sinks
To add a SNMP trap sink:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the SNMP link on the Service tab.
4. Enter a Trap Sink IP address.
5. Choose a Trap Filter.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
103