Promise Technology
Removing the Drive Carrier
The drive carrier accommodates 2.5-inch and 3.5-inch drives.
Drive carrier front view
Cautions
Swing open the drive carrier handle before you insert the drive carrier
into the enclosure.
To avoid hand contact with an electrical hazard, remove only one drive
carrier a time.
1.
Press the drive carrier release button.
2.
Grasp the handle between thumb and finger, gently pull the empty drive carrier out of the
enclosure.
3.
Carefully lay the drive into the carrier with the power and data connectors facing away from the
carrier handle.
Carrier release button
20
VTrak N1616