Locating A Power Supply; Viewing Cooling Unit Status; Viewing Temperature Sensor Status - Promise Technology VTrak E610f Product Manual

3. Highlight the enclosure you want and press Enter.
4. Highlight Power Supplies and press Enter.
The screen displays the operational and fan status of VTrak's two power
supplies. If any status differs from normal or the fan speed is below the
Healthy Threshold value, there is a fan/power supply malfunction. See
"Replacing a Power Supply" on page 259.

Locating a Power Supply

To locate a power supply:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
4. Highlight Power Supplies and press Enter.
5. Highlight Locate Power Supply and press Enter.
The LED on the selected power supply blinks for one minute.

Viewing Cooling Unit Status

To view the status of the blowers:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
4. Highlight Cooling Units and press Enter.
The screen displays the status and speed of VTrak's cooling units. If fan or
blower speed is below the Healthy Threshold, there is a malfunction. See
"Replacing a Cooling Unit Fan or Blower" on page 260.

Viewing Temperature Sensor Status

To view the status of the temperature sensors:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
4. Highlight Temperature Sensors and press Enter.
If any temperature exceeds the Healthy Threshold value, there is an
overheat condition in the enclosure. See "Making Enclosure Settings" on
page 180 and "Chapter 8: Troubleshooting" on page 307.
Chapter 5: Management with the CLU
181