Forcing a Physical Drive Offline or Online
The Physical Drive–Force Offline/Online tab enables you to force an:
•
Online physical drive to go Offline
•
Offline physical drive to go Online
The Force Offline/Online tab appears only for physical drives that are assigned to
disk arrays.
To force a physical drive offline or online:
1.
Click the Subsystem
2.
Click the Enclosures
3.
Click the Enclosure
4.
Click the Physical Drives
5.
Click a Physical Drive
6.
Click the Force Offline/Online tab in Management View.
7.
Click the Submit button.
8.
In the confirmation box, type the word confirm in the field provided.
9.
Click the OK button.
If a physical drive has both a Stale and a PFA condition, click the
Clear tab once to clear the Stale condition, then click again to
clear the PFA condition.
Forcing a physical drive offline or online is likely to cause data
loss. Back up your data before you proceed. Use these functions
only when required.
Forcing a physical drive offline will cause your logical drives to
become degraded. If Auto Rebuild is enabled and a spare drive is
available, the disk array will begin rebuilding itself automatically.
icon in Tree View.
icon.
icon.
icon.
Chapter 4: Management with WebPAM PROe
Note
Caution
Important
icon.
135