Making Management Settings; Configuring A Das System - Promise Technology SmartStor DS4600 Product Manual

SmartStor DS4600 Product Manual

Making Management Settings

This category includes the following topics:
• Configuring a DAS System (below)
• Locating the SmartStor (page 21)
• Editing the Node Name of SmartStor (page 22)
• Viewing the System Event Log (page 23)
• Making Mail Event Log Settings (page 24)
• Sending a Test Email Message (page 25)
• Upgrading the Firmware (page 26)
• Making Enclosure Settings (page 27)
• Shutting Down the SmartStor (page 28)
• Restarting the SmartStor (page 29)

Configuring a DAS System

SmartStor has two modes:
• One Click Setup – Loads a collection of default settings. Recommended for
most users.
• Advanced Setup – Enables you to make your own settings. Recommended
for advanced users.
One Click Setup
To configure your DAS system using One Click Setup:
1. Open the SmartNAVI Main Window.
See "Opening the Main Window" on page 13.
2. Click the Setup Wizard icon and click the One Click Setup button.
Do NOT run One Click Setup or Automatic Setup on a DAS
system that is already configured! Those actions will delete your
data and folders!
Caution
18