Making Controller Settings - Promise Technology Pegasus3 R4 Product Manual

Promise Technology

Making Controller Settings

T o make controller settings:
1. From the Device menu, choose Component List.
Mouse-over the controller, then click the Settings button.
2.
Make setting changes as required:
• Enter, change or delete the alias in the Alias field.
• SMART Log – Check the box to enable or uncheck to disable.
• SMART Polling Interval – Enter a value into the field, 1 to 1440 minutes.
1440 minutes = 24 hours
• Enable Coercion – Check the box to enable or uncheck to disable.
• Coercion Method – Choose a method from the dropdown menu:
• GBTruncate
• 10GBTruncate
• GrpRounding
• TableRounding
• Write Back Cache Flush Interval – Enter a value into the field, 1 to 12 seconds.
• Enclosure Polling Interval – 15 to 255 seconds.
• Adaptive Writeback Cache – Check the box to enable or uncheck to disable.
• Forced Read Ahead – Check the box to enable or uncheck to disable.
• Enable HDD Park Ahead (Level 1) – Check the box to enable
• HDD Park Ahead Interval [10 - 1440] – Enter a value into the field, 1 to 1440 minutes.
1440 minutes = 24 hours
• Enable HDD Low Rotation Speed (Level 2) – Check the box to enable
• HDD Low Rotation Speed Interval [10 - 1440] – Enter a value into the field, 1 to 1440
minutes. 1440 minutes = 24 hours
• Enable HDD Idle Spin Down (Level 1) – Check the box to enable
• HDD Idle Spin Down Interval [10 - 1440] – Enter a value into the field, 1 to 1440
minutes. 1440 minutes = 24 hours
3. Click the Save button.
4. Click the X icon to close the settings panel.
66
Pegasus3 Series