Horn Inspection; Fuel Unit - KYMCO PEOPLE 250 Service Manual

19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS

HORN INSPECTION

Remove the front cover. ( 2-5)
Disconnect the horn wire couplers.
The horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.

FUEL UNIT

FUEL UNIT INSPECTION
Remove the fuel unit.
Disconnect the fuel unit wire connectors.
Measure the resistance between the fuel unit
wire terminals with the float at upper and
lower positions.
Wire Terminals
Y/W G
9.1
Use the W range for YF-3501
FUEL METER INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Check the fuel meter for correct indication by
moving the fuel unit float up and down.
Float Position
Upper
Lower
Wire Terminals
Free
Apply
The fuel meter is normal if it operates as
above indicated. If not, check for loosely
tightened nuts, poorly connected terminals or
shorted wires.
19-5
Upper Lower
9.3W 95 96W
Display
Much (Full)
Less (Empty)
Display
From Much to Less
From Less to Much
Horn
Fuel Unit
Fuel Unit
Upper
Lower
PEOPL E 250
Fuel Full
. Fuel Empty