KYMCO PEOPLE 250 Service Manual page 224

19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS
HORN BUTTON INSPECTION
Remove the handlebar front covers. ( 2-3)
Disconnect the horn wire couplers.
Depress the horn button and check for
continuity between the wire terminals.
Color
Light Green
Position
FREE
PUSH
TURN SIGNAL SWITCH INSPECTION
Remove the handlebar front covers. ( 2-3)
Disconnect the turn signal switch wire
couplers and turn on the turn signal switch.
Check for continuity between the wire
terminals.
Color
Light Blue
Position
L
N
R
DIMMER SWITCH INSPECTION
Remove the handlebar front covers. ( 2-3)
Disconnect the headlight dimmer switch wire
couplers.
Turn on the dimmer switch and check for
continuity between the wire terminals.
Color
White/
Blue
Position
LO
HI
PASSING
STOP SWITCH INSPECTION
Remove the handlebar front covers. ( 2-3)
Disconnect the front/rear stop switch wire
couplers.
Check for continuity between the wire
terminals when the front brake lever is
applied.
Color
Brown/Blue Green/Yellow
Position
FREE
APPLY
Brown/Blue
Orange
Gray
White Brown/
Blue
Blue
Horn Button
Turn Signal Switch
Dimmer Switch
PASSING
Stop Switch
PEOPL E 250
Br/L
O
SB
Stop Switch
19-4