KYMCO PEOPLE 250 Service Manual page 148

12
. COOLING SYSTEM
THERMOSTAT
THERMOSTAT REMOVAL
Remove the met-in box and carrier.
Remove the body cover, center cover and
rear fender cover A.
Drain the coolant.
Disconnect the thermosensor wire from the
thermosensor.
Disconnect the water hose from the
thermostat housing.
Disconnect the air vent tube from the
thermostat housing.
Remove the mounting bolt and the
thermostat housing from the cylinder head.
Remove the two bolts and separate the
thermostat housing halves.
Remove the thermostat from the thermostat
housing.
12-15
Water Hose
Air Vent Tube
Thermostat
Thermostat
PEOPL E 250
Thermostat
Bolt
Thermosensor Wire
Bolts