KYMCO PEOPLE 250 Service Manual page 75

6
. CYLINDER HEAD/VALVES
Remove the camshaft holder.
Remove the dowel pins.
Remove the camshaft gear from the cam chain
to remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
IN: 34.14mm replace if below
EX:34.02mm replace if below
Check each camshaft bearing for play or
damage. Replace the camshaft assembly with
a new one if the bearings are noisy or have
excessive play.
6-5
Cam Chain
Camshaft Gear
Camshaft Bearings
PEOPL E 250
Camshaft Holder
Dowel Pins