KYMCO PEOPLE 250 Service Manual page 115

9
. FINAL REDUCTION
Install the transmission case cover.
Install and tighten the transmission case
cover bolts.
Install the clutch outer/driven pulley.
Install other removed parts in the reverse
order of removal.
After installation, fill the transmission case
with the specified oil.
• Place the scooter on its main stand on
level ground.
• Check the oil-sealing washer for wear
or damage.
Specified Gear Oil:
Oil Capacity:
At disassembly : 0.23 liter
At change
Install and tighten the oil check bolt.
Torque: 7.8 11.8N-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt
hole and add the specified oil to the proper
level if the oil level is low.
SAE90#
: 0.18 liter
Transmission Case Cover
Oil Check Bolt Hole/Filler
Drain Bolt
PEOPL E 250
Bolts
9-8