Headlight Aim; Clutch Shoe Wear; Cooling System - KYMCO PEOPLE 250 Service Manual

3
. INSPECTION/ADJUSTMENT

HEADLIGHT AIM

Turn the ignition switch ON.
Turn on the headlight switch.
Adjust the headlight aim by turning the
headlight aim adjusting bolt.

CLUTCH SHOE WEAR

Start the engine and check the clutch
operation by increasing the engine speed
gradually.
If the motorcycle tends to creep or the engine
stalls, check the clutch shoes for wear and
replace if necessary.

COOLING SYSTEM

COOLANT LEVEL INSPECTION
Place the scooter on its main stand on level
ground.
Check the coolant level of the reserve tank
and the level should be between the upper
and lower level lines.
If necessary, remove the screw and reserve
tank cover to fill the reserve tank with
recommended coolant to the "F" level line.
Recommended Coolant: SIGMA Coolant
(Standard Concentration 30%)
• The coolant level does not change no
matter the engine is warm or cold. Fill
to the "F" (upper) line.
COOLANT REPLACEMENT
• Perform this operation when the engine
is cold.
3-9
Headlight Aim Adjusting Bolt
Screw
Reserve Tank Cover
PEOPL E 250
Upper Line
Lower Line