KYMCO PEOPLE 250 Service Manual page 40

2
. EXHAUST MUFFLER/FRAME COVERS
Remove the met-in box and rear carrier. ( 2-
6 )
Remove the four screws attaching the floor
board.
Remove the two screws on the rear fender A.
.
Disconnect all of the wire couplers.
Remove the body cover, center cover and rear
fender A together.
FLOOR BOARD REMOVAL
Remove the met-in box and rear carrier. ( 2-
6 )
Remove the body cover, center cover and rear
fender A together. ( 2-6 )
Remove right and left side cover. ( 2-6 )
Remove the four bolts on the floor board.
Remove the floor board.
2-7
Screws
Bolts
PEOPL E 250
Screws
Screws
Wire Couplers