KYMCO PEOPLE 250 Service Manual page 206

16
. BATTERY/CHARGING SYSTEM
A.C. GENERATOR REMOVAL
A.C. generator removal ( 10-3)
A.C. generator installation ( 10-6)
REGULATOR/RECTIFIER
INSPECTION
Remove the met-in box. ( 2-6)
Remove the regulator/rectifier wire coupler.
Check the continuity between the wire
terminals.
Normal Direction: Continuity
(+) Probe
I
II Red/White
Reverse Direction: No Continuity
(+) Probe
I
II
VOLTAGE REGULATION TEST
Connect a voltmeter across the battery
terminals.
Start the engine and gradually increase the
engine speed.
The battery terminal voltage should be within
14.0 15.0V.
(-) Probe
Yellow Green
Yellow
(-) Probe
Green Yellow
Yellow Red/White
A.C. Generator Stator
Right Crankcase Cover
Regulator/Rectifier
Normal
Direction
Green
Voltage Sensor
PEOPL E 250
Pulser Coil
Bolts
Red/White
Reverse
Direction
Black
16-6