KYMCO PEOPLE 250 Service Manual page 143

12
. COOLING SYSTEM
Inspect the mechanical (water) seal and seal
washer for wear or damage.
The mechanical seal and seal washer
must be replace as a set.
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the eight bolts attaching the right
crankcase cover.
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and inner
bearing.
Impeller
Seal Washer (Porcelain)
Bolts
Water Pump Assembly
Snap Ring
PEOPL E 250
Mechanical Seal
Water Pump Assembly
Inner Bearing
Water Pump Shaft
12-10