Horn & Lights Inspection - KYMCO People S 250 Owner's Manual

OPERATION
PRI - Horn & lights inspection
1 1 1 1 1
3 3 3 3 3
1. Turn on the ignition switch to see if the headlight 1 and
the tail light 2 are illuminated. Check the lenses for dirt
or damage.
2. Squeeze each brake lever to make sure the brake lamp in
the tail light 2 illuminates.
3. Operate the turn signal switch to make sure the turn signals
3 flash. Make sure each of the four signals flash, and the
lenses are free of dirt and are not broken.
32
3 3 3 3 3
3 3 3 3 3
4. Turn the ignition switch to "ON -
button 4 to make sure the horn sounds.
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
The horn is an essential safety item, as it alerts other
traffic to your presence.
The headlight must be in good working order to illumi-
nate your riding path at night.
The tail/brake light is required so other traffic can see
your scooter and be alerted to your intention to stop or
slow down.
The turn signals indicate your turning intentions.
Because all of these systems are vital safety items, con-
tact your KYMCO dealer for replacement bulbs or elec-
trical system repair should there be any malfunctions.
" and press the horn