Carburetor Installation - KYMCO PEOPLE 250 Service Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
Check the heater with battery.
If the heater is getting hot, means the heater
without problem, otherwise the heater has to
be changed.

CARBURETOR INSTALLATION

Tighten the drain screw.
Install the carburetor onto the intake manifold
and tighten the band.
Install the air cleaner connecting tube and
tighten the band.
Connect the throttle cable to the carburetor.
Connect the heater carburetion wire coupler.
After connecting the throttle cable, adjust
the throttle grip free play to 2
Connect the auto bystarter wire.
Connect the fuel tube and vacuum tube to the
carburetor.
Connect the throttle position sensor wire.
Perform the following inspections and
adjustments:
•Throttle grip free play ( 3-3)
•Idle speed ( 3-6)
Install the seat, met-in box and frame body
cover.
13-17
Air Cleaner Connecting
Tube Band
6mm.
Throttle Cable
T.P.S
T.P.S Wire
PEOPL E 250
Heater
Intake Manifold Band
Heater Carburetion
Wire Coupler
Auto Bystarter
Fuel Tube
Auto Bystarter Wire