KYMCO PEOPLE 250 Service Manual page 67

5
. ENGINE REMOVAL/INSTALLATION
Remove the left rear shock absorber.
Remove the right rear shock absorber lower
mount bolts.
Remove the right rear shock absorber.
Remove the rear wheel nut.
Disconnect the rear brake fluid tube from the
guide.
Remove the four bolts on the rear fork to
remove rear brake caliper and rear fork.
Remove the bolt to disconnect the engine
negative cable.
Remove the engine mounting nut.
Remove the two nuts of the right and left
step bar.
Remove the right and left step bar.
Rear Shock Absorber
Bolt Nut
Rear Fork
Bolt
Nuts
Step Bar
PEOPL E 250
Bolts
Brake Fluid Tube
Engine Negative Cable
Engine Mounting Nut
Nuts
Step Bar
5-4