Horn & Lights Inspection - KYMCO Super 8 50 Owner's Manual

OPERATION
PRI - Horn & lights inspection
1 1 1 1 1
1. Turn the igntion switch to "
1 to check if it sounds.
22
" and press the horn button
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
2. Turn on the headlight switch to see if the headlight 4 and
the tail light 3 are illuminated. Check the lenses for dirt or
damage.
3. Squeeze each brake lever to make sure the brake lamp in
the tail light 3 illuminates.
4. Operate the turn signal switch to make sure the turn signals
2 flash. Make sure each of the four signals flash and the
lenses are free of dirt and are not broken.
The horn is an essential safety item as it will alert other
traffic to your presence.
The headlight must be in good working order to illumi-
nate your riding path at night.
The tail/brake light is required so others in traffic can
see your scooter and be alerted to your intention to stop
or slow down.
The turn signals indicate your turning intentions.
Because all of these systems are vital safety items, con-
tact your KYMCO dealer for replacement bulbs or elec-
trical system service or repair should there be any mal-
functions.