KYMCO PEOPLE 250 Service Manual page 171

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
Disconnect the fuel unit wire connector.
Remove the fuel tube between the fuel tank
and the fuel filler.
Disconnect the fuel vapor tube.
Disconnect the fuel tube between the fuel
tank and fuel strainer.
Remove the four bolts on the fuel tank.
Remove the fuel tank.
The installation sequence is the reverse of
removal.
13-21
Fuel Unit Wire
Connector
Tube to Fuel Strainer
Bolts
PEOPL E 250
Tube to Fuel Filler
Fuel Vapor Tube
Bolts