Collate/ Uncollate Output To The Secondary (Sub) Tray - Oce CS620 User Manual

Output applications
9.7.3

Collate/ Uncollate output to the secondary (sub) tray

A machine with Finisher FS-607 installed is set to Collate output to the
primary (main) tray by default, regardless of whether or not to be equipped
with other optional devices. Change the output tray and select the desired
output mode by following the procedure below.
!
Detail
For detailed specifications, see "Paper tray/ exit tray capacity" on
page 3-6 and "Finisher FS-607" on page 25-9.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
3
Select the secondary (sub) tray as the output tray.
– Touch [Output Tray] to display the Output Tray Selection Screen.
– Touch the tray position key [=] of the secondary (sub) tray to
highlight it, then touch [OK].
Océ CS620/CS650 Pro
9
9-43