Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj - Oce CS620 User Manual

14

14.5.8 03 Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj.

Perform this adjustment for the folding positions in Gate folding mode
processed by the folding unit FD-501.
Reminder
When adjusting Single Fold, Double Fold and Triple Fold at a time, be
sure to start with the Single Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line, and
that of Triple Fold is calculated from the position of the second fold line,
therefore a distance (a), distance (b) and distance (c) in step 5 will be
altered by changing the position of any fold position.
To specify Gate Fold Position Adj.
1
Touch [Adjustment] on the Machine Status screen.
The Adjustment Menu screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then
[06 Gate Fold Position Adj].
The Gate Fold Position Adjustment screen will be displayed.
14-52
Machine adjustment
Océ CS620/CS650 Pro