User setting
02 Scan Initial setting
Besides the factory default setting (Full Auto), you may set the scanning
condition as the initial setting as desired.
To specify the scanning conditions set here to be used as the initial setting
when the Reset function is used, select [User Setting \ 01 System Setting \
04 Reset Setting \ 02 Mode Reset Setting], and then select [Initial] for the
Reset button function.
1
Follow the procedure on page 16-3 to display the User Setting Menu
screen.
2
Touch [02 Initial Setting], and then [02 Scan Initial setting].
Océ CS620/CS650 Pro
16
16-41