Color adjustment
4
Select the desired density area.
–
Check the shadow, mid tone, and highlight areas of the original,
then select the desired density area to adjust the color balance.
–
If the adjustment is necessary for the whole density area, touch
[ALL] to highlight it.
5
Select the color and specify the adjustment value.
–
Touch Cyan, Magenta, Yellow, or Black to highlight it.
Then, touch [,] or [+] to display the desired adjustment value from
–10 to +10.
Select smaller number to make the color lighter, or larger number
to make it darker.
The adjustment can be made for each density area.
6
Touch [OK].
The Quality Adjustment screen will be restored.
Do you want to resume the previous setting?
?
% Touch [Cancel].
Do you want to restore the initial setting?
?
% Touch [Default Set].
Do you want to check the adjustment result?
?
% Touch [Adj. Proof Copy] to print a sample copy.
7
Touch [Close] on the Quality Adjustment screen.
The Copy screen will be restored with the [Color Balance] key
displayed and highlighted under the [Quality Adjust.] key.
Use this key to jump to the Color Balance screen, if any setting change
is desired.
Océ CS620/CS650 Pro
7
7-45