Oce CS620 User Manual page 588

14
8
Display the required size key using up/down arrow keys, and touch it.
9
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
10
Remove the output paper, and close the finisher door.
11
If the test desired result cannot be obtained, touch [ADJUSTMENT]
tab. Repeat the adjustment steps from 3 to 10 until the desired result
is obtained.
12
Touch [Return] to restore the Adjustment Menu screen.
14-28
Machine adjustment
Océ CS620/CS650 Pro