Oce CS620 User Manual page 147

Supplies & handling
4
Move the side guide plates to the edge of the paper.
– Set paper aligning it to the paper feed roller side of the tray.
– Press the release lever of the front side guide plate to move the side
guide plates, and also move the rear edge guide to the edge of the
paper.
5
Push in the tray until it locks into place.
Reminder
Do not load above the limit level on the side guide plate.
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise the machine cannot detect the correct
paper size, or machine trouble may occur.
Océ CS620/CS650 Pro
4
4-21