Oce CS620 User Manual page 686

15
Setting Item/Description
04 Finisher Adjustment
Adjust the settings related to the finisher (FS-607).
05 Scanner Adjustment
Adjust the settings related to the scanner.
• Restart Timing Adjustment: -10 to +20 (1 step =
• Centering Adjustment: -30 to +30 (1 step = 0.1mm)
• FD-Mag. Adjustment: -40 to +40 (1 step = 0.05%)
15-24
01 Saddle Stitcher Stopper Adj.
Adjust the staple positions in widthwise direction
of paper using Fold & Staple mode.
-128 to +127 (1 step = 0.1mm)
02 Half Fold Stopper Adjustment
Adjust the double-folding position using Multi
Half Fold mode.
-128 to +127 (1 step = 0.1mm)
03 Punch Adjustment
Adjust the punch position operated by Punch Kit
PK-512/513.
• Vertical Position Adj.:-128 to +127 (1 step =
0.1mm)
• Horizontal Position Adj.:-50 to +50 (1 step =
0.1mm)
• Registration Adjustment:-20 to +20 (1 step =
0.8mm)
• Paper Edge Detect Sensor Adj.
04 Tri-Fold Adjustment
Adjust the three-folding positions using Multi Tri-
Fold mode.
-128 to +127 (1 step = 0.1mm)
05 2 Position Staple Pitch Adjustment
Adjust the staple pitch in Staple and Fold & Sta-
ple modes.
-128 to +160 (1 step = 1mm)
06 Paper Inserter Tray Size Adj.
Adjust the tray size of upper/lower tray of the Pa-
per Inserter PI-502.
07 Output Quantity Limit
Specify the quantity limit for each of Staple, Fold
& Staple, Multi Half Fold, and Multi Tri-Fold
modes.
0.1mm)
Utility screen outlines
Default
Océ CS620/CS650 Pro